Control Microsystems 5901 Manuel télécharger pdf (Page 77)

5901 High Speed Dialup Modem Hardware Manual

October 19, 2007

Default: 50 (1 second)

11.14 S14 - General Bit Mapped Options Status

Indicates the status of command options.

Default: 138 (8Ah) (10001010b)

Bit 0 This bit is ignored.

Bit 1 Command echo (En)

0 = Disabled (E0)

1 = Enabled (E1) (Default.)

Bit 2 Quiet mode (Qn)

0 = Send result codes (Q0) (Default.)

1 = Do not send result codes (Q1)

Bit 3 Result codes (Vn)

0 = Numeric (V0)

1 = Verbose (V1) (Default.)

Bit 4 Reserved

Bit 5 Tone (T)/Pulse (P)

0 = Tone (T) (Default.)

1 = Pulse (P)

Bit 6 Reserved

Bit 7 Originate/Answer

0 = Answer

1 = Originate (Default.)

11.15 S16 - Test Mode Bit Mapped Options Status

S16 indicates the test in progress status.

Default: 0

Bit 0 Local analog loopback

0 = Disabled (Default.)

1 = Enabled (&T1)

Bits 1-7 Not used

11.16 S19 - Reserved

S19 is supported for backwards compatibility only. No value can be written. Responds with default

value.

Range: None

Default: 0

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 89 90

Pas de commentaire

Control Microsystems 5901 Manuel Page 77